Model:
T5；
CAS#
: 13463-67-7；
Very
small particle size: particle size less than 5 nm
Good
dispersion performance: It can be directly dissolved in water to form a
transparent liquid without stirring. It can be sprayed onto the furniture
surface and the wall to form a uniform transparent nano-coating to purify the
indoor air.
High
catalytic activity: The catalytic activity of this nano-titanium dioxide has
been tested and is 30 times higher than that of ordinary nano-titanium dioxide.
It can quickly capture and decompose indoor formaldehyde, benzene, ammonia,
TVOC and other harmful gases, and has a good deodorizing effect.
Technical
indicators:
|
Model
|
T5
|
|
Powder
appearance
|
White
to light yellow powder
|
|
The
appearance of powder dissolved in water
|
Transparent
liquid
|
|
Particle
size
|
<5nm
|
|
Purity
|
99.9%
|
|
Surface
properties
|
Hydrophilic
|
Usage:
Use T5 powder with distilled water, deionized water, pure water, etc., to make
an aqueous solution, spray on the wall, ceiling, require good atomization
effect, no water droplets, formaldehyde index within 24 hours, odor indicators
can meet the standard (serious Degree, twice spray).
Precautions:
1.
The inside and outside of the furniture can be wiped and treated with UV light.
(Aqueous solution concentration is 1%), metal surface is not recommended for
treatment;
2.
Ventilation begins after spraying. If there are a lot of indoor furniture, the
volatilization rate of formaldehyde is faster and the concentration is higher.
It is recommended to spray several times to increase the degradation rate.
3,
when spraying, generally use paint spray gun (1mm caliber), the atomization effect
is good, this will spray more evenly and improve efficiency.
4.
Before spraying, clean the surface to be coated, and it should not cover the
sprayed object. The spray gun should be 30-45cm away from the coated object.
5.
The natural drying time of the coating film is about 1520 minutes, and it takes
48 hours to completely cure. Do not scrub vigorously before it is completely
cured.
6.
For sewage treatment, first dissolve T5 with a small amount of pure water, and
then add it to the sewage. It is recommended to take the water in front of the
second settling tank, the water in front of the biochemical pool, and the
treatment with better transparency is more obvious. The sewage treated by the
inorganic precipitation treatment is more suitable. The dosage is about 100g of
T05 powder for one cubic sewage.
|
